上海玉研科学仪器有限公司

电话:021-35183767
   021-54377179

传真:021-35183767-8008

QQ:3007536034

地址:上海市闵行区兴梅路485号 XingMei Rd 485,Shanghai,China

当前位置:首页 > 细胞培养及分析设备 > 显微镜物镜加热器
细胞培养及分析设备

显微镜物镜加热器

时间:2016-10-02来源:本站作者:玉研仪器

详细介绍

显微镜物镜加热器 OBJECTIVE HEATER 

Features

Temperature controlled heating band
Easy installation around the objective
Fits any objective on the market
Compatible with the following OKOLAB Controllers:
H301-T-UNIT-BL-PLUS
UNO-T-H-PREMIXED
UNO-T-H-CO2
H401-T-CONTROLLER
Compatible with Inverted and Upright Microscopes
Self CalibrationRoutines with BL controllers
Voltage: 24 V
Power: 13 W



When should I use an Objective Heater
You should use an objective heater, if you:

Perform Oil Immersion Imaging with a Top Stage Incubator
Use dipping lens with an upright Top Stage Incubator
Why should I use an Objective Heater?
Because, if you don't, sample temperature will drop due to oil contact with the cold objective, as shown in the following graph.

 

Step 1: Objective not in contact with Petri 2; Objective Heater Off.

Step 2: Objective in oil contact with Petri 2; Objective Heater Off.

Step 3: Objective in oil contact with Petri 2; Objective Heater on, Offset value 5.3°C.

During the self calibration routine, the offset value of the objective heater is progressively increased, until T2 reaches the desired set point temperature of 37.0°C.

Figure 3 reports the profile of T1, T2, and of Objective Heater Temperature during the experimental campaign described above.

 

 

 

    您想了解更多详细资料吗?

    请与我们联系:

    TEL021-35183767021-54377179

         18502129044

    QQ3007536034

    微信:yuyanbio

    Mailyuyanbio@126.com

    欢迎您的咨询!

qq在线客服